0121 251 1077

Cart Cart

Phobya 4Pin Molex To 6x 3Pin Fan Splitter PCB

Phobya 4Pin Molex To 6x 3Pin Fan Splitter PCB
Phobya 4Pin Molex To 6x 3Pin Fan Splitter PCB Phobya 4Pin Molex To 6x 3Pin Fan Splitter PCB


SKU 81097
Quantity in stock No items available
EAN 4049469131289
Our price: £5.99


Quantity Out of stock

Customers Also Bought

Phobya fan splitter, a central distribution point in their computer!

Especially in systems with many fans or have large radiators where many fans can be mounted. Now with the Phobya 4Pin Molex to 3pin Splitter 6x up to 6 fan cables can be connected.

With a Velcro mat and matching adhesive surface, this distribution can even be mounted upside down on almost every point of her enclosure.

Technical data:
Material: Plastic
Color: Black
Dimensions (L x W x H): 45 x 25 x 18mm
Power Connector: 4Pin Molex
fan connector: 3 pin 6x
Max Output: 35W

Delivery: 1x to 6x Molex 4Pin Phobya 3pin Splitter
: *
: *
: *

Product rating

Sign in to rate


  • Author: Dark Mantis
    The first one I am going to look at is the small internal distribution board. It is supplied boxed which is nice to see as it provides some degree of protection considering there

    are many exposed prongs which could be easilly bent. This board is tiny and so easy to find a small space to fix it somewhere inside the computer case. At one end there is

    the input for the power cable which comes directly from the power supply of the computer and is in the form of a four pin male Molex connector. Over the rest of the printed

    circuit board are evenly spaced six, three pin fan headers. Because of the way the board is designed there is no way to make use of any speed readout from the fans or even

    control them individually although it would be possible to control the fans as a group which could be useful if they were all connected to the same item like a triple radiator

    with push/pull configuration.

    The board can be located anywhere within reason inside the case even the ceiling as it is fixed by some hook and eye "Velcro" style tape that is

    sticky on both sides. Once stuck to the surface the glue takes a while to reach it's maximum potential and after that is quite difficult to remove as long as the substrate is

    clean and not coated. All the fan headers have the same potential elecrically and carry the full 12v by default. The PCB has been made as small as it is possible to do and

    still fit the required number of connectors on it. It measures 45mm (1.75") by 25mm (1") and stands approximately 15mm (0.5") high without any plugs attached. It is simple

    and effective and does exactly what it is designed for and the price of 3.49.
Back To Top