Temperature Sensor G1/4 With Display - Blue
High-precision thermal sensor for G1 / 4 inch thread. Can directly be screwed into a thread of a surge tank such as Coolplex, aluminum tube or Bullseye and seals a durable O-ring from. The shank is knurled, which facilitates screwing by hand, in the area of the sensor head, the residual wall thickness is reduced to <1 mm, which allows quick and precise measurements. He is univerell used with those sold in the store devices.
This blue illuminated thermometer can measure the temperature at any location inside or outside of the PC's. With this thermometer have the temperature is always in the eye, for example, graphics card, power supply, CPU, hard disk or simply the case temperature.
Material: Nickel plated brass
Accuracy: about 0.3K (precision measurement possible)
Cable: 2-pin plug with 20cm cable
sensor cable: about 50cm cable
measuring range: 0 to 90 ° C
Power supply: about 5V power Supply voltage
Connector: Loop-through 4pin Molex connector
Dimensions: 4.8 x 2.8 x 1.9cm
L ° C means: (check = cable from the display to the sensor!) No connection
H ° C means: Reversed voltage / short ( = connect Displayport cable to the sensor falschrum / poland at both)!
-xx ° C is: attach also incorrect polarity (= cable from the display to sensor the other way around)
There have been no reviews for this product.