CandCCentral UK - PC Water Cooling, Computer Cooling, And Case Modding

With the vast majority of mid to high-end computers using 120mm exhaust fans and PSUs which incorporate 120mm fans, We came up with a very simple CPU cooler design that would use these fans to help cool the CPU, rather than relying solely on a CPU fan. We approached Scythe with this idea who were more than happy to put our design through the preliminary stages of development. And now, 18 months later we are delighted to co-present you with a cooler that does exactly what our initial design set out to do.

As already mentioned, the Kama Angle uses the airflow from the exhaust and power supply fan to aid cooling. The images below help to illustrate this. If the chassis has the PSU installed at the bottom of the case this is not a problem because most of the chassis designs that use this configuration allow the installation of another exhaust fan at the top of the case. The Kama Angle will therefore utilise that fan instead of the PSU fan.

The first image above shows the ideal position of the cooler and where to install the supplied 120mm fan. The second image shows the possibility of rotating the cooler in 90° increments if this is required. The cooler can be rotated a full 360°. The second image also shows alternative fan mounting positions. It is even possible to mount a total of three 120mm fans to the cooler, providing you have the space! All you need is another two 120mm fans and two pairs of fan clips.

From a noise point of view the Kama Angle is exceptional. The 120mm PWM fan only produces 6.4 dBA at its slowest setting but if you want to increase the performance of the cooler you can raise the fan speed by altering your motherboard's BIOS settings. Even at its maximum speed, the fan will never produce more than 24 dBA, which is still very quiet.

Taking the noise levels into consideration and given the fact the cooler will fit all major Intel and AMD processors, the Kama Angle has every angle covered (sorry!!) when it comes to cooling your CPU!!

Specifications
Model Name Kama Angle
Model Number SCANG-1000
Compatibility Intel socket 478 and socket T / LGA 775 all speeds - AMD socket 754, 939, AM2 and AM2+ all speeds
Fan Dimensions (W x D x H) 120 x 120 x 25 mm
Fan Speed 324 ~ 1,200 RPM ±10%
Fan Noise Level 6.4 ~ 24.0 dBA
Fan Type 4-pin PWM
Air Flow 14.43 ~ 68.54 CFM
Baseplate-Material Nickel-plated copper
Weight 640 g (Heatsink) + 115 g (Fan)
Warranty 24 months