Phobya Nano-G 14 Silent Waterproof 1000rpm Multioption S7 (140x140x25mm)
Phobya's new masterpiece of cooling technology!
This is a fan that will satisfy both Silent-PC users and performance-oriented PC builders which is unique on the fan market. This innovative fan will bring fear to it's competitors and keep your system cool with all of it's great features!
The manufacturer's consortium Phobya has achieved that an increased Airflow does not necessarily result in higher noise emissions by using an innovative fan blade design. The specially curved fan blades in combination with the unique design and high fan blade density lead the way to the future of cooling! The bearing is quipped with the newest Nano technology which greatly reduces friction and noise emissions. The innovative motor design in combination with an optimally chosen fan speed does the rest to provide exceptional performance and quiet operation.
At full speed even the most modern fan will become audible. Therefore the Phobya fans are designed to handle lower voltages well which allows operation in a voltage range of 7-12V. This gives the option of a virtually inaudible operation whilst a strong Airflow will still keep your system cool. The fan is shipped with cables for voltage reduction. These cables reduce the voltage to 7V if desired. All cables are sleeved black which supports the elegant and sleek appearance of the fan.
The appearance nowadays also is an extremely important factor when considering a fan. The red fan blades in combination with an elegant black frame, completely in an elegant glossy finish result in a truly spectacular appearance of this fan which is a great choice for any system!
For cleaning of the fan the full rotor can be removed by lightly pulling on the frame respectively. Therefore cleaning of the fan can easily be accomplished: Simply hold the fan under running water and rinse off dust and dirt. After a short drying period the fan can be reassembled by simply pushing the rotor back into the casing and the fan can be used again.
Technical specifications:
Dimensions: 140x140x25mm
Color: Black frame, red fan blades
Weight: 138g
Nominal voltage: 12V
Starting voltage: 7V
Current draw: 0,22A
Nominal speed: 1000rpm (+/- 10%)
Airflow: 107,76m³/h / 63,44CFM
Noise emission: 25 dB(A)
MTBF (25°C): 100.000hrs
Connector: 3Pin
Extent of delivery:
1x Phobya Nano-G 14 Silent 1000rpm
1x 20cm cable adaptor 12V to 7V (black sleeved)
-
Universally deployable Fillport for water cooling systems. The Fillport can be connected to the reservoir with a piece of hose and allows comfortable filling and de-aeration without opening of the enclosure if the Fillport is installed in the top of the enclosure.
£3.59
Add to cart
-
EK-Supreme HF (HF stands for High Flow; revised version) Full Copper is a universal CPU socket waterblock designed for the most hardcore enthusiast users. EK-Supreme HF is best performing CPU water block on market.
£57.98
Add to cart
-
7/16"ID, 5/8"OD (16/11mm) Compression Fitting 90° Angled Rotary - Black Nickel
£3.59
Add to cart
Product rating
Reviews
-
Author: Dark Mantis
[b]Phobya Nano-G14 Silent Waterproof 1000 rpm S7 Fan Review
by Dark Mantis[/b]
The Phobya Nano-G14 Silent Waterproof 1000 rpm S7 is Phobya's latest offering in the 140mm size group. This size is becoming more sought after recently as there are more radiators and cases it can fit. It follows the usual packaging with their well known blue and red "Fear it" boxing. This has a partial plastic screen to see the contents without opening the package. On the rear it has the
specifiactions and general blurb in three languages, English, German and French.
On opening the carton I found there was the fan, a bag of fixing screws and an extra voltage drop cable. This cable reduces the supply voltage to the fan from the full 12volts (full speed) down to only 7 volts(just over half speed). The maximum speed from this fan is 1000 rpm but with the drop down adapter connected it would run at approximately 600 rpm. The power is supplied to the fan via
a standard three pin molex connection. This can be attached to a motherboard fan header or a connection on a dedicated fan controller.
The fan blades (hub) and the surrounding frame are al made from polycarbonate so it is very strong and light. The hub is a dark red colour and the frame is piano black which makes it look very expensive. The frame has a clever triple fixing hole mounting in each corner so it can fit just about any space made for any make of fan.
Once again Phobya has decided to use the nano-technology for the bearing that they have named "Nanoflux". This is a very advanced use of electro-magnetism to maintain the shaft centrally in the bearing. It also means that it is quiet and there is no oil to worry about leaking. All the electronics are waterproofed as well just for further safety.
This fan will quietly (25 dB/A) keep your system cool by pushing a massive 58 cfm of air through it. That is very efficient at only 1000 rpm. As I mentioned earlier it will run on anything between 7 and 12 volts and uses only 0.2 Amps so it is not greedy.
[b]I do like this fan, both the main cable and adaopter cable have been braided and apart from the fact that it has no LEDs there is little to find fault with and I award it 9/10[/b]