Phobya 5.25 "Dual Bay Reservoir Black

Phobyas first slot in the reservoir, with many technical innovations, attention to detail, a visual treat: A little more than a reservoir of plexiglass!

First and foremost, a reservoir the expanding cool water can accommodate and act when bleeding the system, ie during the initial filling, supportive. Here are the first technical innovations come from the developers of the House Phobya used: an internal channel system helps to vent, breaks down the air bubbles from the water circulation and flow back into the pure coolant in the system. Even with extremely strong pumps, the construction is designed so that no new air is sucked into the system! The filling of the reservoir can be traditional, let something go out that turn black nickel-plated Phillips head screw from the 3/8Zoll closing thread and then the liquid, the easiest means of a funnel, into running. An alternative and much more convenient way is to enter into a connection with a Fillport. The latter need the reservoir no longer touched and can be filled from outside the housing. The small details are what makes this major component of the water cooling as Interesting! Sun open 5x 1/4Zoll thread many ways the hose to the tank to get here. This means the visual aspect is not to give way to constructive, but is brought into line!

Optics in addition to constructive another very important point! Especially with larger body you have always too much 5.25 "drive bays. These are now used addition to the practical component of the shoring of the Reservoir Phobya also ptical appreciation to the generally most viewed page of the PC is upgraded. A second thin Plexiplatte on the actual container protects the black adapter plate by the word of the brand product "Phobya" was admitted. In addition, on the other side, a level indicator to monitor is recessed so that is always enough liquid in the container and this will not be lost sight of. With colored liquid these snippets seem very appealing and set a very individual touch. This can be underlined further by the 4 x 5mm LEDs are mounted on the rear openings with its desired color LEDs which not only enhances the container, no, the entire front of her body!

Supplied with all necessary parts for assembly are included. On the corpse just to fix the container is pushed into the front of the tower and attached to the black screws. Since usually only 3 of the 5 connecting thread holes are required, are also included 5 black nickel-plated plugs supplied.


Technical details:
Material: Acral / Plexi (PMMMA)
Color: transparent, black front
Dimensions (L x W x H): 176 x 149 x 88mm
Led holes: 4 x 5mm
Befüllöffnungsgewinde: 1x 3/8Zoll
Thread: 5x 1/4Zoll

Meets ROHS guidelines!

Delivery:
1x Reservoir
3x plugs
4 x 5mm mounting bolt
4x washers