The new Alphacool Heatmaster II was developed in Germany over multiple years, and has continuously been improved considering the experiences from the first version. Hence we are now, after a development and testing period of...
This connection cable can be used for connection of different devices from aquacomputer via the aquabus interface.
This connection cable can be used for connection of different devices from aquacomputer via the aquabus interface.
Aquacomputer Flow sensor "High Flow" G1/4 For Aquaero, Aquastream XT Ultra And Poweradjust
This kit allows the mounting of a material aquaero 5 LT into a free 5.25 inch drive bay.
The poweradjust 2 is primarily optimized for the control of Laing DDC pump, but other consumers may be operated on the controller with up to 25W continuous load at 12 volts.
Full colour lighting module for connection to the LED socket of the aquaero 5. The lighting module is based on an ultra-bright RGB LED which can be adressed on all 3 fundamental colours individually.
Aquacomputer Temperature Sensor Inline G1/4 For Aquaero, Aquastream XT And Aquaduct
Aquacomputer Temperature Sensor Internal/External Thread G1/4 For Aquaero, Aquastream XT And Aquaduct
Adaptor cable for connection of a Laing DDC pump to the power output of the poweradjust USB or a powerbooster-o...
Flowmeter GMR Transparent G1 /2" Outer Thread - High Flow
Koolance INS-FM16 Coolant Flow Meter [no nozzles]
Koolance INS-FM17 Coolant Flow Meter & Adapter Board [no nozzles]
This 2-Pin extension cable can be sued for sensors which are too far away from the monitoring device. Especially in larger cases or when attempting cable management out of sight these extension come in very hand.
Three-wire cable to connect the flow sensor to control fan or readout devices. Length 40 cm, double plug (special plug on the sensor). The cable can be extended if required by a standard 3-pin fan extension cable.
Three-wire cable to connect the flow sensor to control fan or readout devices. Length 80 cm, double plug (special plug on the sensor). The cable can be extended if required by a standard 3-pin fan extension cable.
Phobya Front Panel For 2 Displays - Black
Phobya Temperature Sensor Internal/External G1/4"
Phobya Temperature Sensor Internal/External G1/4" - Blue Display
Phobya Temperature Sensor Internal/External G1/4" - Blue Display
Temperature Sensor G1/4 - Black Nickel
This thermometer has a display with a blue back light. It allows measurements of temperature of the connected sensor.
Highly precise In-Line temperature sensor which is practical for all G1/4" connections. The sensor can be integrated at any position in the cooling loop. At the sensor position inside the unit the remaining wall thickness is less than 1mm and the sensor is insulated against the outside to allow quick and precise measurements of the coolant.
This thermometer has a display with a blue back light. It allows measurements of temperature at any spot inside or outside of the PC. With this thermometer you can always keep an eye on the temperature of e.g. the graphics card, PSU, CPU, HDD or simply the case temperature.
Thermosensor In-Line 2x G1/4 Threads With Blue Display
Temperature Sensor In-line 2x G1/4 Inner Threads With Blue LCD Display
In-line Temperature Sensor 2x G1/4 Inner Threads









