CartYour cart
Your cart
Cart is empty
mCubed T-Balancer Analog Sensor Hub
The analog sensor hub extends the T-Balancer to analog sensors, and other useful features which are especially made for water cooling systems.
Emergency switch-off:
If a certain temperature is exceeded, or the waterflow is below or above a limit, the emergency switch will be activated. It is connected between ATX power switch and mainboard. First a soft switch-off will be tried (Windows shut down), after a while a hard switch-off. Limits and times are custom configurable.
Analog sensors:
You can connect up to 6 analog temperature sensors, thin foil sensors (0.4mm) or water temperature probes.
Microprocessor:
A separate microprocessor is linearising the analog sensors. By standard analog sensors have strong deviations. But with linearising, analog sensors get so precise that their perfomance comes close to that of the digital sensors.
I2C-SMBus:
The sensor bus will be connected like the digital sensors over the bus to the T-Balancer. Analog sensors can be used in addition to the digital sensors. That sums up to 14 possible temperature sensors.
Flowmeter:
You can connect up to 2 flowmeters and configure the puls rate to ensure a high compability to other flowmeters.
Dimensions: 60x35x20mm
Needed Hardware: TBAN-XL or TBAN-SL4
Needed Software: 2.0 (available as Beta at the moment)
Package contents: sensor hub, connection cable, 4 analog foil sensors, ATX power switch cable, velcros
Please note! For the use of the sensor hub you will need software version 2 .x
The emergency switch-off is included. Additionally thin foil analog temperature sensors are included. These sensors are very sensitive to any temperature changes.
thickness 0.45mm
cable length 80 cm
resistor 10KOhm
Emergency switch-off:
If a certain temperature is exceeded, or the waterflow is below or above a limit, the emergency switch will be activated. It is connected between ATX power switch and mainboard. First a soft switch-off will be tried (Windows shut down), after a while a hard switch-off. Limits and times are custom configurable.
Analog sensors:
You can connect up to 6 analog temperature sensors, thin foil sensors (0.4mm) or water temperature probes.
Microprocessor:
A separate microprocessor is linearising the analog sensors. By standard analog sensors have strong deviations. But with linearising, analog sensors get so precise that their perfomance comes close to that of the digital sensors.
I2C-SMBus:
The sensor bus will be connected like the digital sensors over the bus to the T-Balancer. Analog sensors can be used in addition to the digital sensors. That sums up to 14 possible temperature sensors.
Flowmeter:
You can connect up to 2 flowmeters and configure the puls rate to ensure a high compability to other flowmeters.
Dimensions: 60x35x20mm
Needed Hardware: TBAN-XL or TBAN-SL4
Needed Software: 2.0 (available as Beta at the moment)
Package contents: sensor hub, connection cable, 4 analog foil sensors, ATX power switch cable, velcros
Please note! For the use of the sensor hub you will need software version 2 .x
The emergency switch-off is included. Additionally thin foil analog temperature sensors are included. These sensors are very sensitive to any temperature changes.
thickness 0.45mm
cable length 80 cm
resistor 10KOhm
Other products
-
Mayhems Aurora Concentrated Coolant 250ml - Orillia Orange
Mayhems Aurora 250ml only makes up to 750ml of aurora fluid. E.g 250ml concentrate + 500ml water = 750ml aurora fluid.
£12.59
-
Mayhems Pre-Mix X1 UV Clear Blue - 1Ltr
Mayhems X1 is based on a proprietary blend of refined vegetable extracts that are fully biodegradable and have a very low order of oral toxicity. It comes with a Child Safty Cap as well as a spout so you can fill all manner of systems easly.
£7.99
-
Mayhems Aurora Tharsis Red Coolant - 1Ltr
Mayhems Aurora Tharsis Red Coolant is a Red base liquid with a suspended Nano silver pearl effect.
£14.99
Product rating
Reviews
There have been no reviews for this product.
