LUND Alu Plex Reservoir

A new designer piece on it's way to worldwide success!

Jon Lund, a Danish watercooling and modding expert, has made it his goal to make a reservoir for watercooling users which is not only practical but also good-looking! This reservoir with its finely machined grooved surface is a completely new approach to reservoir design! The mount safely locks in place when the reservoir is inserted thanks to the grooved structure of the mount which fits perfectly into the reservoir's structure. Of course the mount and reservoir can be installed anywhere in the case. Added flexibility is given as the reservoir itself can be attached to the mount at any point of it's body.

The top of the reservoir is equipped with a G3/8" thread and a suitable screw-in seal plug. The thread can be used to e.g. connect a Fillport or similar devices.

The side of the outer tube is equipped with an oval opening which serves as a window which allows a peek into the inside of the reservoir. Additionally the bottom piece of the reservoir is equipped with three G1/4" threads which allows insertion of the connection fittings as well as an additional feature such as a lighting module. If not used the thid thread can also be sealed with the included sealing cap.

Technical specifications:
Material: Plexi, POM, Aluminium
Dimensions: (D x H): 67 x 170mm
Lower connection threads: 3x 1/4"
Upper connection thread: 1x 3/8"

Extent of delivery:
1x LUND Alu Plex Reservoir including mount and mounting material