CandCCentral UK - PC Water Cooling, Computer Cooling, And Case Modding

The Flow-O-Matic Rev1.5 electronic flow monitoring is used for active electronic flow monitoring in the water cycle. He is simply looped into the cycle and outputs an unchanging speed signal as long as a flow is present. He is simply connected to the motherboard and the signal can be evaluated using the BIOS, or appropriate software (eg ABM). (Connectors: d = 6-11mm)

Summary:

The Flow-O-Matic Rev1.5 electronic flow monitoring is used for active electronic flow monitoring in the water cycle. The Flow-O-Matic Flow monitoring is simply in the water circuit is looped, and outputs an unchanging speed signal as long as a flow is present. This tachometer signal is directly from the motherboard, but also from other devices such as be evaluated with the KTC-Balanver or Fan-O-Matic.
Thus, the flow-O-Matic can be easily connected to the motherboard and BIOS are evaluated using the signal, or appropriate software (eg, ABM), which eg can be used to turn off the computer when disruptions occur.

Details:

As another highlight of the Flow-O-Matic Rev1.5 electronic features a blue LED Electronics which also provides a visual feature. It is thus not only an extremely useful but also an absolutely cool accessory.
To facilitate assembly is supplied with a Velcro strip, with which the flow-O-Matic easily and quickly mounted in the housing can be.

Features:

* no significant flow reduction
* Hose connections for tube d = 6-11mm (inside)
* directly on the motherboard can be connected
* standard 3pin molex connector
* Cable length ~ 30 cm
* fast and safe to handle
* easy to retrofit

In regard to sensor compatibility:
Flow sensors are only suitable to join them in a suitably compatible and can not control directly to a fan output as of a motherboard or fan controller, connect, since the output pulses of Duchflusssensors not have the required pulse rate (such as a fan) achieved. Only possibility is to use the Pulsmatik (Art. 71000) between the flow sensor and as The motherboard is connected. However, we advise alone has both practical and cost reasons, starting from this solution and to recommend this flow sensor connected directly to a compatible control unit.