Cart
Cart is empty
- Water Cooling
We stock a great range of PC water cooling kits, and components.
All water cooling products are available from our UK stock.
Order before 3pm for guaranteed same day shipping Monday - Friday.
- Case Fans
PC Case Fans, Cables, Mounts & Controllers
- Fan Controllers
- Thermal Paste
- Modding
PC Case Modding And Cables
- Cases
- PSU's
- Gaming
- Air Cooling
EK Water Blocks EK-FB KIT RE4 - Plexi
EK-FB KIT RE4 is a complete water cooling solution for ASUS Rampage IV Extreme motherboard consisting of two separate water blocks. The water blocks directly cools Intel X79 Express southbridge (PCH) chip and power regulation (VRM / MOSFETs) module. Please note this water block cools exactly as much heat generating components as ASUS factory cooling solution. It is medium-high to high flow water block that can be easily used with systems using weaker water pumps.
Base of the waterblock is made of electrolytic copper while the top is made of quality cast acrylic material. The sealing is performed by quality rubber gaskets.
Water block is mounted with enclosed M2.5x4, M3x4 and M3x8 DIN7985 screws and PVC washers. The 2.1- and 2.5mm nickel plated brass screw-in standoffs are already preinstalled and allow for easy installation.
Enclosed thermal pad is used on voltage regulator module to improve cooling performance of the waterblock. On the southbridge please use any electrically non-conductive thermal grease, e.g. Arctic Cooling MX-4.
A maximum diameter of barbs/fittings on SB part of the water block kit must be 22.2 mm in order to allow the installation of the graphics card mounted with EK-FC series backplate in the first PCIe x16 slot!
Enclosed:
- 2 x water blocks (MOSFET & SB)
- mounting mechanism
- thermal pads
Fittings are optional not enclosed! Four fittings are needed to make this waterblock to operate properly. All EK-PSC fittings are compatible with this water block!
Made in Slovenia - Europe!
Base of the waterblock is made of electrolytic copper while the top is made of quality cast acrylic material. The sealing is performed by quality rubber gaskets.
Water block is mounted with enclosed M2.5x4, M3x4 and M3x8 DIN7985 screws and PVC washers. The 2.1- and 2.5mm nickel plated brass screw-in standoffs are already preinstalled and allow for easy installation.
Enclosed thermal pad is used on voltage regulator module to improve cooling performance of the waterblock. On the southbridge please use any electrically non-conductive thermal grease, e.g. Arctic Cooling MX-4.
A maximum diameter of barbs/fittings on SB part of the water block kit must be 22.2 mm in order to allow the installation of the graphics card mounted with EK-FC series backplate in the first PCIe x16 slot!
Enclosed:
- 2 x water blocks (MOSFET & SB)
- mounting mechanism
- thermal pads
Fittings are optional not enclosed! Four fittings are needed to make this waterblock to operate properly. All EK-PSC fittings are compatible with this water block!
Made in Slovenia - Europe!
Other products
-
Alphacool Cape Cora HF 642 Konvekt Black
The Cape Cora passive radiators are a major part of the watercooling scene and many passive cooling systems utilize these modules. Now the system was furthermore improved and features better cooling performance to suit even the most current computer generations.
£71.99
-
Hardware Labs Black Ice Radiator SR1 240 - Black
The Black IceŽ SR240 raises the benchmark for silent performance. The Black IceŽ SR1-240 uses the same ultra-stealth optimized Black IceŽ SR1 core design in a dual-120mm fan form factor, offering performance enthusiasts with an acoustically balanced yet scalable PC radiator platform.
£59.99
-
Phobya Flow Meter Cable 3 Pin 80cm - Black
Three-wire cable to connect the flow sensor to control fan or readout devices. Length 80 cm, double plug (special plug on the sensor). The cable can be extended if required by a standard 3-pin fan extension cable.
£2.69
Product rating
Reviews
There have been no reviews for this product.
