EK-Multioption RES X2 - 400 Advanced

The new, Multioption X2 reservoir from EK is a major step towards new multioption reservoirs.
The multioption X2 offers at least twice as much setup possibilities.
Manufactured of first class quality 60mm acrylic tube and POM Acetal, sealed with quality EPDM rubber washers.
New version has the outer diameter of 60mm (compared to old version which had 50mm).
All new features give customer better mounting, easier filling and faster bleeding.

Advanced version:
Bottom part gives user 5 options for placing the G1/4 fittings/barbs as inlet or outlet.
Top part gives additional 3 options for placing the G1/4 fittings/barbs as inlet or outlet.
So the advanced version has total 8 options. Unused G1/4 ports are plugged with enclosed G1/4 Plugs.
Additionally the reservoir comes with three internal 12mm ID and 16mm OD tubs in different lengths with thread on one end so it can be screwed into threaded ports inside the reservoir (2 × bottom, 1 × top).

The most important property/advantage of the Advanced Multioption X2 reservoir is the exchangeable insert in the bottom part.
The stock delivery comes with Insert #1 which is rotatable for additional options for routing the water flow.
Advanced version also comes with an anticyclone which can be replaced with Insert #1.
All inserts are fastened with stainless steel M3 screws.

New Multioption X2 Reservoirs comes with a pair of EK design reservoir holders with adjustable fastening force with enclosed Allen key.
Please check for Multioption X2 Reservoir accessories for different Inserts.

Technical data:
- Installation height: 400 mm
- Diamter: 60mm
- Capacity: 475 ml
- Weight (netto): 0,61kg

Enclosed within delivery:
- EK-Multioption X2 Reservoir Advanced
- 3 × Internal 12mm ID 16mm OD tube with thread on one side
- Pair of EK reservoir holders with mounting screws
- 6 × G1/4 Plugs
- 1 × 6mm Allen key for plugs
- 1 × 2,5mm allen key for reservoir holders
- 1 × 2mm allen key for exchanging bottom inserts