CandCCentral UK - PC Water Cooling, Computer Cooling, And Case Modding

The aquadrive X4 can be used to cool and encapsulate up to four (!) hard disk drives. The aquadrive X4 itself can be installed into three adjacent 5.25 inch drive bays and features a voluminous reservoir.

The side panels of the aquadrive X4 are made from Delrin, with two massive copper plates in direct contact to the hard disk drives. All covers are made from stainless steel, top and bottom cover are equipped with acoustic insulation. The back cover is designed for S-ATA hard disk drives, but break-out elements can easily be removed to allow installation of P-ATA drives.

An integrated fill port with sealing screw gives you a convenient way to fill and refill the reservoir when installed into a PC, using the washing bottle included in delivery. The reservoir extends into both side panels and both cavities are connected through two pipes installed behind the front cover. The reservoir also features a Plexiglas windows in the front cover with a red fill level indicator.

For installation into the PC's drive bays, four rubber decouplers are included in delivery. Additional threads can be used to install the aquadrive X4 without the rubber decouplers or as transportation locks.

Approved for hard disk drives rotating at up to 15,000 rpm.

Details:
Can be installed into three 5.25 inch drive bays, depth 171.5 mm
Can be used with up to four 3.5 inch hard disk drives
Materials: Delrin/copper/stainless steel
Volume of the reservoir: 250 ml
Weight (without coolant, without hard disk drives): 2,65 kg
Threads for fittings: G1/4"

Scope of delivery:
aquadrive X4 hard disk drive cooler
four rubber decouplers and screws
one washing bottle

Please note: Fittings are not included in delivery, please order seperately! Threads are G1/4.