Fittings

Air Cooling > Case Fans >  Fittings
Coolink Anti-Vibration Bolts, qty 12 (3 fans)

Coolink Anti-Vibration Bolts, qty 12 (3 fans)

Ref: Cl-AV

Price:
Ex VAT £4.00
£4.70 Including  VAT at 17.5%

Quantity:  

Extra-soft blue silicone gives optimal fan noise reduction
Compatible with all fans with standard mounting holes
Easy to fit and remove - no case modifications required
Excellent value for money and long-lasting (durable and tearproof)
Package contains 12 mounts - enough for three fans

Fansis Silica Gel Anti-Vibration Screws, qty 8 (2 fans)

Fansis Silica Gel Anti-Vibration Screws, qty 8 (2 fans)

Ref: Fansis-Bolts

Price:
Ex VAT £2.50
£2.94 Including  VAT at 17.5%

Quantity:  

Extra-soft blue silicone gives optimal fan noise reduction
Compatible with all fans with standard mounting holes
Easy to fit and remove - no case modifications required
Excellent value for money and long-lasting (durable and tearproof)
Package contains 8 mounts - enough for two fans

Xilence 80/92mm to 120mm Fan Adapter

Xilence 80/92mm to 120mm Fan Adapter

Ref: X-Fan-Adapter

Price:
Ex VAT £3.25
£3.82 Including  VAT at 17.5%

Quantity:  

Allows a 120mm to be installed on an 80 or 92mm opening
Enables a lower fan speed for a given quantity of airflow
A lower fan speed means less noise!

Vantec Case Fan Vibration Damper 120mm

Vantec Case Fan Vibration Damper 120mm

Ref: VT-VDK-120

Price:
Ex VAT £2.65
£3.11 Including  VAT at 17.5%

Quantity:  

Vantec Fan Vibration Dampener Kits are designed to reduce noises caused by operating case fans. Ultra-light Silica Gel material absorbs vibration which are the general cause of excess noise while adding additional protection to your case fan.

Vantec Case Fan Vibration Damper 92mm

Vantec Case Fan Vibration Damper 92mm

Ref: VT-VDK-92

Price:
Ex VAT £2.25
£2.64 Including  VAT at 17.5%

Quantity:  

Vantec Fan Vibration Dampener Kits are designed to reduce noises caused by operating case fans. Ultra-light Silica Gel material absorbs vibration which are the general cause of excess noise while adding additional protection to your case fan.

ZM-MC1 Fan Multi-Connector Cable

ZM-MC1 Fan Multi-Connector Cable

Ref: ZM-MC1

Price:
Ex VAT £2.50
£2.94 Including  VAT at 17.5%

Quantity:  

Allows you to run four fans from one 4-pin PSU connector
Two fans run at 5V, two at 12V
Simple to use

Zalman Noiseless Resistor Cable RC56

Zalman Noiseless Resistor Cable RC56

Ref: ZRC56

Price:
Ex VAT £2.00
£2.35 Including  VAT at 17.5%

Quantity:  

This small resistor converts 3-pin fans from 12 volts to approximately 7 volts. This basically means it reduces the speed of your 3-pin fans, which in turn reduces the noise the fan makes. We tested the resistor with a 92mm fan and without the resistor installed the fan ran at 2700 RPM. Once the resistor was installed the fan ran around 1400 RPM. The reduction in noise was significant.

Zalman Fan Extension Cable

Zalman Fan Extension Cable

Ref: ZM-EC1

Price:
Ex VAT £3.32
£3.90 Including  VAT at 17.5%

Quantity:  

Depending on the position of your motherboards 3-pin fan header(s) and the mounting position of your case fan(s), you may find that the fan cable is not long enough. This simple extension gives approximately an extra 75 cm (30 inches) of length for any 3-pin fan.

Air Cooling > Case Fans >  Fittings