Highly precise In-line temperature sensor for almost all G1/4" threads. The sensor can be integrated at any point in the cooling loop. At the measuring point the wall thickness of the casing is reduced to <1mm and the sensor is insulated from the outside to allow maximum precision and quick reaction of the measurement. The display is connected directly and shows temperature changes very promptly.
High-Flow:
Due to its inner diameter of 1cm this sensor adds no restriction
compared to fittings and small to medium sized tubing. Therefore this
sensor is truly ''high-flow capable''
Technical details:
Material: Nickel coated brass
Dimensions: (LxD): 28x23mm
Inner diameter: 10,5mm
Dimensions display: 4,8 x 2,8 x 1,9cm
Precision of measurement: ca. 0,3K
Resistance: 10KOhm
Extent of delivery:
1x Temperature sensor In-Line 2x G1/4 inner thread with display (blue)
Please note: The temperature is measured with a permanently attached temperature sensor which cannot be replaced.
Special mounting kit with concealed springs for alphacool coolers as well as coolers of external manufacturers
£4.49









