This connection cable can be used for connection of different devices from aquacomputer via the aquabus interface.
This connection cable can be used for connection of different devices from aquacomputer via the aquabus interface.
The aquaero is an absolutely autonomous working microprocessor-controlled device with USB 2.0 interface. All speed parameters and sensor values can be set and visualized in an user-friendly PC-software.
The aquaero is an absolutely autonomous working microprocessor-controlled device with USB 2.0 interface. All speed parameters and sensor values can be set and visualized in an user-friendly menu or through an even easier to use PC-software. Additionally, the graphic LC display can be used to display almost any information using the popular LCD s...
The aquaero is an absolutely autonomous working microprocessor-controlled device with USB 2.0 interface. All speed parameters and sensor values can be set and visualized in an user-friendly menu or through an even easier to use PC-software. Additionally, the graphic LC display can be used to display almost any information using the popular LCD s...
Keyboard, mouse and media controls: Use your aquaero 5 as a universal input device.
Replacement bezel for an aquaero 5 PRO. The aquaero 5 PRO ships with a stainless steel bezel, using this black anodized aluminum bezel, the aquaero perfectly matches any black PC case.
Replacement bezel for an aquaero 5 XT. The aquaero 5 XT ships with a stainless steel bezel, using this black anodized aluminum bezel, the aquaero perfectly matches any black PC case.
This kit allows the mounting of a material aquaero 5 LT into a free 5.25 inch drive bay.
This black Aluminium mounting front plate allows the installation of one to three poweradjust 2 USB in a vacant 5.25" drive bay.
Mounting of this heatsink on an aquaero 5 increases heat dissipation from the power components, hence increasing the possible power output from the fan channels. On the aquaero 5 XT this heatsink is already included and mounted on the controller, all other versions can be upgraded easily with this kit.
The poweradjust 2 is optimized primarily for the control of Laing DDC pump, but other consumers with up to 25W continuous power at 12 volts can be connected to the controller
The poweradjust 2 is primarily optimized for the control of Laing DDC pump, but other consumers may be operated on the controller with up to 25W continuous load at 12 volts.
Full colour lighting module for connection to the LED socket of the aquaero 5. The lighting module is based on an ultra-bright RGB LED which can be adressed on all 3 fundamental colours individually.
Mounted on an aquaero 5 controller, this water block improves the heat dissipation and thereby significantly increases the maximum power output of the fan channels.
Adaptor cable for connection of a Laing DDC pump to the power output of the poweradjust USB or a powerbooster-o...









